Suspend/Hibernation Functions - Panasonic CF-45 Series Reference Manual

Suspend/Hibernation Functions

Starting Up Your Computer Quickly
If you want to immediately start up and continue an application after shutting down your com-
puter, you can do so by using the suspend or hibernation function.
Differences between the suspend function and hibernation function
Function
Suspend function
Where data is saved to Memory
Speed Fast
Requires power supply Yes
Setting the Suspend or Hibernation Function
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
press
Enter
5
Press , then select [Yes]
F10
Shutting Down Using the Suspend or Hibernation Function
The computer should be set for suspend or hibernation (
Power off your computer
Do not touch the power switch while the com-
puter is entering the suspend or hibernation
mode.)
CAUTION
At the "beep*" sound, release your finger from the power switch. If you continue to
slide on the switch and hold it for more than four seconds, the "beep*" sound will
come out again and the power will go off. Data not previously saved will be lost.
If the computer will not be operated for an extended period of time, it is recom-
mended that hibernation mode is used instead of suspend mode.
* When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the Setup Utility
( page 27) or by the key combination
(if power is cut, all data is lost)
( page 26)
, select [Power]
, select [Power Switch] and press
, select [Suspend] or [Hibernation] and
Fn + F4
Hibernation function
Hard disk
Somewhat slow
Power not required to maintain data
Enter
see the above procedure).
Suspend Mode
or
Hibernation Mode
, there will be no beep sound.
4