Panasonic Toughbook CF-37 Series Reference Manual page 50

Setup Utility
Boot Menu
The default order is as follows: [Floppy Disk]
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
NOTE
The device for starting up the Operating System can also be selected during computer start-up.
After the computer is turned on, the device selection display will appear when ESC is pressed
while "Press <ESC> to enter Boot First Menu" is shown. (When selecting [CD-ROM/DVD-ROM]
from Boot First Menu, if the CD has not been set in the CD-ROM/DVD-ROM drive, it is not possible
to start up from the CD.)
When the setting of the [Boot] menu is changed, the selection screen display will also change.
"Starting Up/Shutting down"
Exit Menu
Parameters
Save Values & Exit
Exit Without Saving Changes
Get Default Values*
Load Previous Values
Save Current Values
1. [Floppy Drive]
2. [Hard Disk]
3. [CD-ROM/DVD-ROM]
*
The SuperDisk Drive is included in [ATAPI Removable].
Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
Exit the Setup Utility and save your changes to CMOS.
Exit the Setup Utility without saving your changes to CMOS.
Set the default settings for operating system. The password remains.
Load previous values from CMOS for all Setup items.
Save your changes to CMOS.
* This item may not be displayed when starting up the Setup Utility with the User Password.
[Hard Disk] [CD-ROM/DVD-ROM].
, and then press F6 .
, and then press F5 .
NOTE
If the Supervisor Password or User
Password has been set, the pass-
word must be entered before Win-
dows can start.
50