Panasonic Toughbook CF-37 Series Reference Manual page 8

Touch Pad
(Advanced)
CAUTION
When [PS/2 Compatible Mouse] is displayed instead of [ALPS GlidePoint]
in [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] - [Mouse]:
1 Select [PS/2 Compatible Mouse] and then press [Properties].
2 Select [Driver] - [Update Driver] and then press [Next].
3 Select [No, select drive from list] and then press [Next].
4 At the [Device Driver Wizard], select [Alps GlidePoint] and press [Finish].
5 At the [Insert Disk], press [OK].
6 Input [c:\util\drivers\mouse] and then press [OK].
7 Press [Close].
Handling the Touch Pad
Do not place any object on the work surface or press down forcefully with sharp-
pointed objects (i.e. nails), hard objects that can leave marks (i.e. pencils and ball
point pen).
Do not allow contact with substances that could dirty the touch pad, such as oil.
The cursor may not work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as a gauze or soft cloth
first applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene or thinner, or disinfectant-type alcohol.
8