Table of Contents
Advertisement
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulat
in
structions.
Before connecting the appliance, make sure that the supply voltage
marked o
n the rating plate corresponds with your mains supply
v
oltage.
W
ARNING: THIS APPLIANCE MUST BE EARTHED.
o The appliance must be wired into a 30A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located
away from it.
o The spur outlet must still be acc
located in its operating position.
o Cable type: H05 RRF 3 core x 6 mm²
C
onnecting the mains supply cable
o The mains terminal block is located on the underside of the hob
and the terminals are accessible by removing the terminal block
cover. This is done by depressing
releasing it from the securing clips.
ions and in compliance with Baumatic's
above the appliance and no more than 1.25m
essible even when your hob is
the front of the cover and
19
Advertisement
Table of Contents
