Migrating And Extending - HIKVISION 9600 Series User Manual

10.5 Migrating and Extending

Purpose:
When the remaining storage space is lower than the actual needs, you can take array migration and online extend
to enlarge the capacity of the virtual disk.
Before you start:
At least one available physical disk should exist for the array migration.
Steps:
1. Enter the Physical Disk Settings interface. At least one available physical disk should exist for the array
migration.
Menu>HDD>RAID>Physical Disk
2. Click Array tab to enter the Array Settings interface.
3. Select the array to be migrated and click
Notes:
1) Only migrating from RAID 5 to RAID 5 is supported by the device.
2) If there is no virtual disk existing under the array, the array migration cannot be done.
3) If the virtual disk of the array is under initialization, the array migration cannot be done.
User Manual of 9600/8600/7700/7600 Series NVR
Figure 10. 29 Physical Disk Settings Interface
Figure 10. 30 Array Settings Interface
to enter the Migrate Array interface.
164