Upgrading System; Upgrading By Local Backup Device; Upgrading By Ftp - HIKVISION 9600 Series User Manual

13.4 Upgrading System

Purpose:
The firmware on your NVR can be upgraded by local backup device or remote FTP server.

13.4.1 Upgrading by Local Backup Device

Steps:
1. Connect your NVR with a local backup device where the update firmware file is located.
2. Enter the Upgrade interface.
Menu >Maintenance>Upgrade
3. Click the Local Upgrade tab to enter the local upgrade menu, as shown in Figure 13. 13.
4. Select the update file from the backup device.
5. Click the Upgrade button to start upgrading.
6. After the upgrading is complete, reboot the NVR to activate the new firmware.

13.4.2 Upgrading by FTP

Before you start:
Configure PC (running FTP server) and NVR to the same Local Area Network. Run the 3
on the PC and copy the firmware into the root directory of TFTP.
Steps:
1. Enter the Upgrade interface.
Menu >Maintenance>Upgrade
2. Click the FTP tab to enter the local upgrade interface, as shown in Figure 13. 14.
User Manual of 9600/8600/7700/7600 Series NVR
Figure 13. 13 Local Upgrade Interface
196
rd
-party TFTP software