Upgrading Firmware - HIKVISION 9600 Series User Manual

10.6 Upgrading Firmware

Purpose:
You can view the information of the firmware and upgrade the firmware by local backup device or remote FTP
server.
Steps:
1. Enter the Firmware interface to check the information of the firmware, including the version, maximum
physical disk quantity, maximum array quantity, auto-rebuild status, etc.
2. You can click Upgrade button to upgrade the firmware. Local upgrade and FTP upgrade are available. Since
the upgrading process of the firmware is the same as that of the device firmware, you can refer to Chapter
13.4 for detailed information.
Note: Please contact the dealer immediately if the device cannot work properly after upgrading.
User Manual of 9600/8600/7700/7600 Series NVR
Figure 10. 37 Firmware Interface
Figure 10. 38 Upgrade the Firmware
167