HIKVISION 9600 Series User Manual page 176

3. Set the HDD property to R/W, Read-only or Redundancy.
4. Click the OK button to save the settings and exit the interface.
5. In the HDD Information menu, the HDD property will be displayed in the list.
Note: At least 2 hard disks must be installed on your NVR when you want to set a HDD to Redundancy, and there
is one HDD with R/W property.
User Manual of 9600/8600/7700/7600 Series NVR
Figure 11. 17 Set HDD Property
176