Connecting And Playing Back From A Computer (Usb-Dac); D/A Converter; Install The Driver; Usb-Dac - Marantz PM7005 Owner's Manual

Contents Connections
Connecting and playing back from a
computer (USB-DAC)
You can enjoy high-quality audio playback from the D/A converter built in
to this unit by inputting PCM signal or DSD signal music files into this unit
from a computer via USB connection.
Before USB connecting this unit to your computer, install the driver
0
software in your computer.
Drivers do not need to be installed for Mac OS.
0
Also, you can use whichever commercially available or downloadable
0
player software you like to playback files on your computer.
o Computer (recommended system)
OS
Windows ® Vista, Windows 7 or Windows 8
0
Mac OS X 10.6.3 or later
0
USB
USB 2.0: USB High speed/USB Audio Class Ver.2.0
0
DSD is a registered trademark.
0
Microsoft, Windows Vista, Windows 7 and Windows 8 are either
0
registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Apple, Macintosh and Mac OS are trademarks of Apple Inc.,
0
registered in the U.S. and other countries.
Front panel Rear panel
Playback
o Installing the dedicated driver
(Windows OS only)
n Installing the driver software
1
2
3
Remote control
30
unit
Settings Tips
Disconnect the USB cable between your PC and the
unit.
The driver software cannot be installed correctly if your PC is
0
connected to the unit by a USB cable.
If the unit and your computer are connected by a USB cable and
0
the computer is switched on before installation, disconnect the
USB and restart the computer.
Download the dedicated driver from the "Download"
section of the PM7005 page of the Marantz website
onto your PC.
Unzip the downloaded file, select the 32-bit or 64-bit
exe file that matches your Windows operating system,
and double-click the file.
Index
Appendix