166
3-3. Adjusting the seats
Cancelation procedure
■
Carry only the key you want to cancel and then close the driver' s door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled
properly.
Turn the engine switch to IGNITION ON mode.
1
While pressing the "SET" button, press and hold the door lock switch
2
(either lock or unlock) until the buzzer sounds twice.
If it button could not be canceled, the buzzer sounds continuously for approxi-
mately 3 seconds.
Recalling the driving position using the memory recall function
■
Different driving positions can be registered for each electronic key. Therefore, the
●
driving position that is recalled may be different depending on the key being carried.
If a door other than the driver' s door is unlocked with the smart access system with
●
push-button start, the driving position cannot be recalled. In this case, press the driving
position button which has been set.
Customization
■
Some functions can be customized. (P. 699)
WARNING
Seat adjustment caution
■
Take care during seat adjustment so that the seat does not strike the rear passenger or
squeeze your body against the steering wheel.
RX350_U_OM48E90U