Background color of the indicator/shift position display area (except F SPORT models)
■
The background color of the indicator/shift position display area is changed according to
the driving mode as follows (P. 369):
Eco drive mode: Blue
●
Sport mode: Red
●
G-force display (if equipped)
■
The G-force values may not be zero even when the vehicle is parked, such as when it is
●
parked on an incline.
Depending on the vehicle usage conditions, the brake fluid pressure display may not
●
reach its maximum reading even though the brake pedal is fully depressed.
If a battery terminal is disconnected and reconnected, the steering amount display may
●
be disabled temporarily. After driving the vehicle for a while, the display will be enabled.
Suspension of the settings display
■
Some settings cannot be changed while driving. When changing settings, park the
●
vehicle in a safe place.
If a warning message is displayed, operation of the settings display will be suspended.
●
Tire pressure
■
It may take a few minutes to display the tire inflation pressure after the engine switch is
●
turned to IGNITION ON mode. It may also take a few minutes to display the tire infla-
tion pressure after inflation pressure has been adjusted.
"---" may be displayed if the tire position information cannot be determined due to
●
unfavorable radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may also be dif-
●
ferent from the values measured using a tire pressure gauge.
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is characteristic
of liquid crystal displays, and there is no problem continuing to use the display.
Customization
■
Some functions can be customized. (P. 96, 699)
RX350_U_OM48E90U
2. Instrument cluster
105
2