Emergency towing procedure (vehicles with a towing eyelet)
Take out the towing eyelet. (P. 647)
1
Remove the eyelet cover.
2
Insert the towing eyelet into the hole
3
and tighten partially by hand.
Tighten down the towing eyelet
4
securely using a wheel nut wrench
or hard metal bar.
Securely attach cables or chains to the towing eyelet.
5
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
6
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
7
When the shift lever cannot be shifted: P. 660
RX350_U_OM48E90U
8-2. Steps to take in an emergency
629
8