Lexus rx350 2016 Owner's Manual page 320

320
4-5. Using the driving support systems
Changing the vehicle-to-vehicle distance (vehicle-to-vehicle distance
control mode)
Pressing the button changes the vehi-
cle-to-vehicle distance as follows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
Vehicle-to-vehicle distance settings (vehicle-to-vehicle distance con-
trol mode)
Select a distance from the table below. Note that the distances shown corre-
spond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle distance
increases/decreases in accordance with vehicle speed.
Distance options
Canceling and resuming the speed control
Pulling the lever toward you cancels
1
the speed control.
The speed setting is also canceled when
the brake pedal is depressed.
Pushing the lever up resumes the
2
cruise control and returns vehicle
speed to the set speed.
However, cruise control does not
resume when the vehicle speed is
approximately 25 mph (40 km/h) or
less.
RX350_U_OM48E90U
Preceding
vehicle mark
Long
Medium
Short
Vehicle-to-vehicle distance
Approximately 160 ft. (50 m)
Approximately 130 ft. (40 m)
Approximately 100 ft. (30 m)