Care And Maintenance - Gtech HT01 Safety And Instruction Manual

Care and maintenance

CAUTION : ALWAYS DISCONNECT THE BATTERY AFTER USE AND BEFORE CARRYING
OUT ANY SERVICING OR MAINTENANCE
Wear protective gloves before handling the blade.
To ensure long and reliable service, carry out the following maintenance regularly:
Check for obvious defects such as loose, dislodged or damaged blades, loose fixings and
worn or damaged components.
Check that covers and guards are undamaged and correctly fitted.
Blade maintenance:
Wear gloves when handling or cleaning the cutting blade.
Always clean the cutting blade after operation and coat it with a lubricating oil or spray.
This will prevent the blade becoming seized or corroded during storage.
During longer cutting periods 15 minutes or greater it is recommended to lubricate the blade,
this will improve cutting performance and extend the batteries run time. A lack of lubrication to
the blade can severely effect the products run time and may cause the blade to overheat.
Before use visually check the condition of the cutting edges of the cutting blade. Check the
tightness of blade bolts.
When not in use ensure that the blade is covered with the blade guard provided and that it
has been lubricated. Failure to do so may cause the blade to corrode and will severely reduce
cutting performance and battery run times.
Cleaning and storage
Remove the battery from the tool during storage.
Take care not to short the battery contact terminals with metal objects.
Store the tool in a secure, dry place out of reach of children and animals.
Storage outside in a damp environment such as a garden shed may cause certain items such
as the blades to corrode. Always clean and lubricate the cutting blade before storage.
Do not use abrasive materials to clean the product or immerse it in water. Clean the exterior of
the machine thoroughly using a soft brush and cloth. Do not use water or solvents. Remove
all debris especially from the ventilation slots on the motor housing.
When transporting or storing the hedge trimmer always fit the protective guard.
12
helpline 01905 345891 email support@greytechnology.co.uk web www.gtechonline.co.uk
HT01_UKManual2010v3.indd 12 25/03/2010 10:02