Table of Contents
Advertisement
To view the current charge of the battery
Tap
→
1.3 Accessories
A) SD and MMC Cards
Your device has an expansion slot compatible with a range of SD and
MMC memory cards, which are used to store additional files, backup
or transfer data.
To insert or remove a memory card:
Push the memory card into slot (see above) until it clicks
1
into place. The card is secure when it is not protruding
from the base.
2
To remove the card push it in and then release, letting the
card spring out.
When you receive your device there will be a piece of plastic in the
slot; remove as described in "2" above.
B) External Battery
You can purchase an optional External battery to increase the battery
life of your device by up to another 4 hours, and standby by another 150
hours - The External battery can be charged with either your device or
with an External Battery Charger. Charging with the external battery
charger should take about two and a half hours; when it is attached
to the main unit total charging for the External battery and main unit
should be about five hours.
To attach the External Battery:
1
Remove the rubber cover protecting the device connector
for the External battery - The cap is situated just below
the right screw on the back of the device.
Hook the External battery into the embedded slot near
2
the base of the back of your device
3
Tighten the screws situated in the top of the External
battery into your device.
To view the current charge of the External
battery:
1
When you attach the External battery an extra indicator
will be added to the Power screen.
2
To view this indicator tap Start, Settings, System and
then Power.
Settings
→
System
→
Power.
Pocket PC Phone User's Guide
23
Advertisement
Table of Contents
