Backup
1
Tap
Backup
2
If you have inserted the SD card properly it will appear
next to Target.
F
3
Make sure there are no application programs running in
the background, then tap Start.
Reset the Pocket PC Phone and Clear
Memory
You can perform a
your device and a full reset switches the battery off. The result of a
soft reset
is that some data may be lost in programs that are open,
however, the result of cutting power is to wipe all the data and new
programs you have added, and return the device to factory setting, i.e.
it will only have the software that was present when you bought it. On
this basis, it is important not to think about a
restarting, shutting down or even switching off improperly your desk-
top, but rather like a complete crash requiring you having to wipe your
OS. The importance of backing up data to a SD card or your computer
cannot be stressed enough : in the event you have to perform a full
reset your data will not be lost.
To perform a soft reset
If your Pocket PC Phone responds slowly stops responding or freezes,
try soft resetting it. A soft reset causes the Pocket PC Phone to restart
and re-adjust memory allocation. Unsaved data in open windows may
be lost.
Use the stylus to press and hold the Reset button. For details
on finding soft reset, see
To perform a full reset
A full device reset clears memory, deletes all data and restores the
Pocket PC Phone to its default settings. Programs installed at the
factory remain, while data you have created and programs you have
installed are all erased.
1
Unscrew the stylus and use the smaller point of the top-
half.
2
Press the battery switch once to turn it off, and then once
more to turn it back on.
→
Programs
→
SD Backup
or
Restore
tab.
soft reset
or a
full reset
full reset
Chapter 2, Knowing Your Device.
Pocket PC Phone User's Guide
→
then the
- a
soft reset
restarts
as you would
103