Table of Contents
Advertisement
Regulatory Agency
Identification Numbers
For regulatory identification purposes your product is
assigned a model number PW10xx.
The following accessories have been evaluated for use with
your device. Their assigned model numbers listed below can
identify these approved accessories. To ensure continued
reliable and safe operation of your Pocket PC Phone, use only
the accessories listed below with your PW10xx.
Accessories
Pocket PC Phone
Cradle
External Battery Pack
The above X may be any alphanumeric
n
character or blank denoting external
cosmetic changes.
This product is intended for use with certified
n
Class 2, rated 5 V dc, minimum 1A power
supply unit.
European Union Notice
Products with CE marking comply with the R&TTE Directive
(99/5/EC), the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission
of the European Community.
Compliance with these directives implies conformity to the
followng European Norms (in brackets are the equivalent
international standards):
n EN 60950 (IEC 60950)
Safety of InformationTechnology Equipment.
n ETS 300 342-1 (June 1997)
Electromagnetic compatibility and Radio spectrum
Matters (ERM); ElectroMagnetic Compatibility (EMC)
for European digital cellular telecommunications
system (GSM 900MHz and GSM 1900MHz); Part 1:
Mobile and portable radio and ancillary equipment
n GSM11.10
n ANSI/IEEE C.95.1-1992
Specific absorption rate in mobile phone emission
condition for body health
n FCC part 15 and part24
n EN50360, EN50361 for SAR
n SAR :
0.892mW/10g
Model Number
PW10xx
PW15x
PW16x
Pocket PC Phone User's Guide
Important Safety
Information
Retain and follow all product safety and operating
instructions. Observe all warnings on the product and in
the operating instructions.
To reduce the risk of bodily injury, electric shock, fire,
and damage to the equipment observe the following
precautions.
General Precautions
n Heed service markings
Except as explained elsewhere in the Operating or
Service documentation, do not service any product
yourself. Service needed on components inside these
compartments should be done by an authorized service
technicians or provider.
n Damage requiring service
Unplug the product from the electrical outlet and
refer servicing to an authorized service technicians or
provider under the following conditions:
Liquid has been spilled or an object has fallen into
l
the product.
The product has been exposed to rain or water.
l
The product has been dropped or damaged.
l
There are noticeable signs of overheating.
l
The product does not operate normally when you
l
follow the operating instructions.
n Avoid hot areas
The product should be placed away from heat sources
such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
n Avoid wet areas
Never use the product in a wet location.
n Avoid pushing objects into product
Never push objects of any kind into cabinet slots or
other openings in the product. Slots and openings are
provided for ventilation. These openings must not be
blocked or covered.
n Mounting Accessories
Do not use the product on an unstable table, cart,
stand, tripod, or bracket. Any mounting of the product
should follow the manufacturer's instructions, and
should use a mounting accessory recommended by
the manufacturer.
105
Advertisement
Table of Contents
