Setting Sleep Timer; Adding A Timer; Deleting A Timer - Finlux 37F501 Owner's Manual

Timers
To view Timers menu, press "MENU" button and
select Settings icon by using " " or " " button.
Press OK button to view Settings menu. Use " "
or " " button to highlight Timers and press OK to
continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using "
• Use " " or " " button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.

Adding a Timer

• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Network Type: This feature is unavailable to be set.
Timer Type: You can select timer type as Record
or Timer.
Channel: Changes channel by using " " or " ".
Record Type: This item is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Repeat: Sets a timer to be repeated as Once, Daily or
Weekly. Use " " or " " buttons to select an option.
Change/Delete: Sets the change/delete permission.
Playback: Sets the playback permission and parental
settings.
• Press GREEN button to save the timer. Press RED
button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing "
" or " " button.
• Press RED button.
YES by using " " or " " buttons to delete the
• Select
timer. Select NO to cancel.
Select Recording Configuration item in the Settings
menu to configure recording settings. The following
menu is displayed for recording configuration.
" or " " button.
The following options are available for adjustments:
Start Early (*)
You set recording timer's starting time to start earlier
by using this setting.
(*) Available only for EU country options.
End Late (*)
You set recording timer's end time to end later by
using this settings.
(*) Available only for EU country options.
Max Timeshift
This setting allows you to set the maximum time
allowed for timeshifting. Duration options are
approximate and can change accordingly, depending
on the broadcast received.
Format Disk
IMPORTANT: Note that ALL the data stored on the
USB disk will be lost and then the disk format will be
converted to FAT32 if you activate this feature.
•If you want to delete all files on the connected USB
hard disk drive or memory stick, you can use Format
Disk option.
• Also, if your USB disk malfunctions, you can try
formatting the USB disk. In most cases formatting
the USB disk will restore normal operation; however,
ALL the data stored on the USB disk will be lost in
such a case.
• Press OK button while the Format Disk option
is highlighted. A menu will appear on the screen,
requiring you to enter a pin number. If you have not
changed the pin number, the factory default is 0000.
After you enter the pin, a pop-up menu appears on
the screen to ensure that the hard disk should be
formatted, select "YES" and press OK to format the
hard disk. Select "NO" and press OK to cancel. Ensure
you back up important recordings before you format
the USB disk unit.
- 27 -
Recording Configuration