Features Package Contents • 3D Viewing: This product supports the 3D viewing function via an available broadcast or via HDMI, PC,YPBPR source. • Fully integrated Terrestrial digital TV (DVB-T - MPEG2). • HDMI connectors for digital video and audio. This connection is also designed to accept high defi...
Introduction Moisture and Water Do not use this device in a humid and Thank you for choosing this product. This manual will damp place (avoid the bathroom, the guide you for the proper operation of your TV. sink in the kitchen, etc). Do not expose Before operating the TV, please read this this device to rain or water, as this may manual thoroughly.
Waste Disposal • Do not use the 3D Glasses for other purposes such as sunglasses or general eyeglasses. • Packaging and packaging aids are recyclable • Do not use the 3D mode or wear 3D Glasses while and should principally be recycled. Packaging you are moving around.
Page 6
• Do not let water come into contact with the product any of the following symptoms, immediately stop when cleaning it. Ensure that water does not enter watching the 3D TV and consult a doctor: the product. This may result in electric shock or •...
Remote Control Handset Inserting Batteries • Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part. • Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover.
Environmental Information • This television is designed to consume less energy to help save the environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy effi ciency feauture of this TV.
Remote Control Buttons Standby Pause (in Media Browser mode) Stop (in Media Browser mode) No function Rapid advance (in Media Browser mode) No function Subtitle on-off / TXT subtitle (analogue TV mode) / Subtitle (in Media Browser mode) Blue button Yellow button: Active channel list Numeric buttons Previous programme...
TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. Viewing the Connections –...
S/PDIF Coaxial Out outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input RF Input connects to an aerial antenna system. Note: that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
Switching On/Off First Time Installation IMPORTANT: Ensure that the aerial is connected To Switch the TV On and a Common Interface module is not inserted • Connect the power cord to the 220-240V AC, 50 before switching on the TV for the first time installation.
• Press OK button to quit channel list and watch TV. Using Side AV Connectors You can connect a range of optional equipment to your LED TV.. • For connecting a camcorder, connect to the VIDEO To select the “Yes” or “No” option, highlight the item by IN socket and the AUDIO SOCKETS.
CAUTION ! Using USB Inputs • Quickly plugging and unplugging USB devices, is a USB Connection very hazardous operation. Do not repeatedly quickly • You can connect a USB hard disk drive or USB plug and unplug the drive. This may cause physical memory stick to your TV by using the USB inputs damage to the USB player and especially the USB of the TV.
• Multipartiton support is available. Maximum 2 Side HDMI Connection different partitions are supported. If disk have more You can use side HDMI input to connect a device that then 2 partition, crash may occur. First partition of has an HDMI connector to your TV. Use an appropriate usb disk is used for PVR ready features.
• Press “ P+” button to select the next programme. Input Selection Programme Selection (Direct Access) Once you have connected external systems to • Press the numeric buttons on the remote control to your TV, you can switch to different input sources. select programmes between 0 and 9.
(RECORD): the TV will start to record the (Now) : Shows the current programme. selected progamme. You can press again to stop EPG Channel Schedule the recording. Recording via EPG Screen IMPORTANT: To record a programme, you should fi rst connect a USB disk to your TV while the TV is switched off.
To cancel an already set reminder, highlight that Manual Tuning programme and press the OK button. Then select HINT: This feature can be used for direct broadcast “Delete Timer” option. The timer will be cancelled. entry. Note: It is not possible to record or set timer for two or •...
Analogue Fine Tune Listed channels can also be sorted by using the active channel list fi lter. • Select Analogue Fine Tune from the Installation Moving a Channel menu by using “ ” or “ ” and OK buttons. The analogue fi...
Managing Stations: Favourites On-Screen Information You can create a list of favourite programmes. You can press “INFO” button to display on-screen information. Details of the station and current • Press “MENU” button to view main menu. Select programme will be displayed on the information Channel List item by using “...
Page 21
Jump (GREEN button): Jumps to time. Use numeric buttons to type the desired time and press GREEN button again to proceed. Select a device by using “ ” or “ ” button and press Yellow: Opens subtitle time correction menu. Viewing Videos via USB Press button for clear.
to enable all. You can follow the disabled functions If you start the playback with or OK button and with the change of the icons. activate symbols, music or video fi le playback Previous/Next (Left/Right buttons): Jumps to will continue randomly and the random playback will previous or next fi...
Media Browser Settings Note: Switching to a different broadcast or source; and viewing main menu are not available during the timeshifting. • Lip Sync delay may occur during the timeshifting. Standby button is ignored during the timeshifting. The TV will not switch to standby mode during the timeshifting.
Watching Recorded Using the 3D Mode Programmes IMPORTANT! In the main menu, use “ ” or “ ” buttons to select Read and understand the 3D mode safety Media Browser. Highlight Recordings Library item by precautions carefully for your safety before using using “...
Changing Image Size: Picture Formats • You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. “SCREEN” • Press button repeatedly to change the image size. Available zoom modes are listed below.
14:9 Confi guring Picture Settings This zooms up the wide picture (14:9 aspect ratio) to You can use different picture settings in detail. the upper and lower limits of the screen. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu.
Noise Reduction: If the broadcast signal is weak and Autoposition: Automatically optimizes the display. the picture is noisy, use Noise Reduction setting to Press OK to optimize. reduce the noise amount. Noise Reduction can be set H Position: This item shifts the image horizontally to to one of these options: Low, Medium, High or Off.
Operating Settings Menu Items • Press “ ” or “ ” button to highlight a menu item. • Press OK button to select an item. • Press “MENU” button to exit. Settings Menu Items Conditional Access: Controls conditional access modules when available. Language: Confi...
Language Settings Confi guring Language Preferences You can operate the TV’s language settings using this menu. Press “MENU” button and select the fi fth icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Language and press OK to continue: In the confi...
Set PIN: Defi nes a new PIN number. Use numeric Parental Control buttons to enter a new pin number. You will need To prohibit viewing of certain programmes, channels to enter your new pin a second time for verifi cation and menus can be locked by using the parental purposes.
Hard Disk Info Recording Confi guration To view the details about the USB disk, highlight Hard Select Recording Confi guration item in the Settings Disk Info by using “ ” or “ ” key and press OK. USB menu to confi gure recording settings. The following disk information will be displayed: menu is displayed for recording confi...
Scan Encrypted Channels: When this setting is set Confi guring Source Settings as YES, search process will locate the encrypted You can enables or disable selected source options. channels as well. If it is set as NO, encrypted channels The TV will not switch to the disabled source options will not be located in automatic search or manual when “SOURCE”...
Coloured Buttons (RED/GREEN/YELLOW/ Other Features BLUE) Displaying TV Information: Programme Number, Your TV supports both FASTEXT and TOP text Programme Name, Sound Indicator, time, teletext, systems. When these systems are available, the channel type and resolution information is displayed pages are divided into groups or topics. When on the screen when a new programme is entered or FASTEXT system is available, sections in a teletext “INFO”...
USB Is too Slow: If “USB is too slow” message is Tips displayed on the screen while starting a recording, Screen Care: Clean the screen with a slightly damp, try restarting the recording. If you still get the same soft cloth. Do not use abrasive solvents as they may error, it is possible that your USB disk does not meet damage the coating layer of the TV screen.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the Source Supported Signals Available typical video display modes.
Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. Index Resolution Frequency 640x400 70Hz 60Hz 640x480 640x480 72Hz 75Hz 640x480 800x600 56Hz 800x600 60Hz 800x600...
Appendix E: Software Upgrade • Your TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, the TV looks at the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface •...
Using with PS3 (for UK only) • Have both TV and console off. • Turn on the TV and wait for it to power up, then turn on the console (Hold power button until beep) • The PS3 will then identify the 3DTV and ask for resolution information and screen size. •...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN & FUSE YELLOW (Earth)