Viewing The Connections - Side Connectors; Aerial Connection; Power Connection - Finlux 37F501 Owner's Manual

6. S/PDIF Coaxial Out
Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input
7. RF Input connects to an aerial antenna system.
Note: that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
8. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
9. HDMI Inputs are for connecting a device that has a HDMI socket. Your TV is capable of displaying high
definition pictures from devices such as a High Definition Satellite Receiver or Blu-ray Player. Please
see Appendix B for further details.

Viewing the Connections - Side Connectors

1.
CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see "Conditional Access"
section.
2. USB Inputs.
Note that programme recording feature is available via these USB inputs. You
can connect external hard disk drives to this input.
3. Side HDMI Input is for connecting a device that has an HDMI socket.
4. Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones
(optional).
5. Audio Inputs are used for connecting audio signals of external devices. Connect the
audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks
on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
6. The headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to the TV from headphones.

Aerial Connection

• Connect the aerial to the AERIAL INPUT socket located at the rear of the TV.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
outputs digital audio signals of the currently watched source.
- 8 -