Parental Control; Parental Settings Menu Operation (*); Timers; Setting Sleep Timer - Finlux 42F7020-D Owner's Manual

Parental Control

To prohibit viewing of certain programmes, channels
and menus can be locked by using the parental
control system.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Press "MENU" button and select the icon by using "
" or " " button. Press OK button to view the Settings
menu. Use " " or " " button to highlight Parental
and press OK to continue:
To display parental lock menu options, the PIN number
should be entered. The factory default PIN number
is 0000. After coding the correct PIN number, the
parental settings menu will be displayed:
Parental Settings Menu Operation
• Select an item by using "
• Use " " or " " button to set an item.
• Press OK button to view more options.
(*) If you set Country option as UK at the point of fi rst
time installation fi rst time installation, Maturity Lock
option will not be visible. This setting is available only
for EU countries.
Menu Lock: Menu lock setting enables or disables
the menu access. You can disable access to the
installation menu or the whole menu system.
Maturity Lock: When set, this option gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Child Lock: When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work, except for the
Standby/On button. When Child Lock is activated
you are able to switch the TV into Standby mode with
the Standby/On button. To switch the TV on again,
you need the remote control. Hence, if one of those
buttons is pressed, Child Lock Is On will be displayed
on the screen when the menu screen is not visible.
01_MB65_[GB]_[3D]_IDTV_PVR_GOLD14_5103UK_42930W_10078747_50217702.indd 29 01_MB65_[GB]_[3D]_IDTV_PVR_GOLD14_5103UK_42930W_10078747_50217702.indd 29
(*)
" or " " button.
- 29 -
Set PIN: Defi nes a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to enter your new pin a second time for verifi cation
purposes.
IMPORTANT: The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.

Timers

To view Timers menu, press "MENU" button and
select Settings icon by using " " or " " button.
Press OK button to view Settings menu. Use " "
or " " button to highlight Timers and press OK to
continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using "
• Use " " or " " button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.
Adding a Timer
• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Network Type: This feature is unavailable to be set.
Timer Type: You can select timer type as Record
or Timer.
Channel: Changes channel by using " " or " ".
Record Type: This item is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Repeat: Sets a timer to be repeated as Once, Daily or
Weekly. Use " " or " " buttons to select an option.
Change/Delete: Sets the change/delete permission.
Playback: Sets the playback permission and parental
settings.
• Press GREEN button to save the timer. Press RED
button to cancel.
Deleting a Timer
• Select the timer you want to delete by pressing "
" or " " button.
• Press RED button.
• Select YES by using " " or " " buttons to delete the
timer. Select NO to cancel.
" or " " button.
26.04.2012 13:52:03 26.04.2012 13:52:03