Side Hdmi Connection; Connecting The Tv To A Pc; Using Other Connectors; Input Selection - Finlux 37F501 Owner's Manual

• Multipartition HDDs are supported until two
partitions.
• Some stream packets may not be recorded because
of signal problems, so sometimes video may freeze
during playback.
• Record, Play, Pause, Display (for PlayListDialog)
keys could not be used when teletext is ON. If a
recording starts from timer when teletext is ON,
teletext is automatically turned off. Also teletext
usage is disabled when there is ongoing recording
or playback.
• Radio record is not supported.
• The TV can record programmes up to ten hours.

Side HDMI Connection

You can use side HDMI input to connect a device that
has an HDMI connector to your TV. Use an appropriate
HDMI cable to make such a connection. Note that you
should switch to the HDMI source to view the content
from the connected device. Power off both the TV and
the device before making any connections. Side HDMI
Input supports connections between HDMI devices
such as DVD players. You can use side HDMI input
of the TV to connect to an external HDMI device. Use
an HDMI cable to connect.
HDMI DEVICE

Connecting the TV to a PC

For displaying your computer's screen image on your
TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use a 15-pin D-sub display cable
to connect a PC to the TV. Use a PC audio cable
between the audio output of your PC and the audio
input of the TV to enable the playback of sound
through your TV. When the connection is made, switch
to PC source. See the Input selection section. Use a
PC audio cable between the audio output of your PC
and the audio input of the TV to enable the playback
of sound through your TV. Set the resolution that suits
your viewing requirements. Resolution information can
be found in the appendix.
Note: If you connect a PC to the TV using HDMI
connection, radio interference may occur. Therefore
SIDE VIEW
- 12 -
this type of connection is not recommended. You
should use VGA connection instead.

Using Other Connectors

You can connect a range of optional equipment to your
TV. Possible connections are shown below. Note that
cables shown in the illustration are not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. For selecting
the related source, see the section "Input selection"
in the following parts.
• To listen to the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
• For connecting to a device that has SPDIF support,
use an appropriate SPDIF cable to enable sound
connection.

Input Selection

Once you have connected external systems to
your TV, you can switch to different input sources.
Press "SOURCE" button on your remote control
consecutively for directly changing sources.
You can operate your TV using both the remote control
and onset buttons.