Features - Sony LMD-3251MT Instructions For Use Manual

Features

Compliance with medical safety
standards in U.S.A., Canada and Europe
IEC 60601-1 and product safety standards in the U.S.A.,
Canada and Europe have been obtained for this monitor.
The monitor is designed for use in the medical treatment
field, with the sheet switch, screen protect panel, etc.
3D
The monitor is a multiple format LCD monitor equipped
with a circular micro-polarizer filter, featuring a precise
image and high performance. It supports various 3D
signal formats, including dual-stream HD-SDI signals,
by using an optional input adaptor (BKM-250TG with a
serial number 7100001 or later) for both 2D and 3D
signals. The provided 3D glasses are designed to suit the
performance of the monitor and for comfort over long
hours of use. The 2D/3D SELECT function provides the
option of either the 2D or 3D monitor display mode.
Circular micro-polarizer filter
Two input signals are separated into even lines and odd
lines on the display and circular polarized before
appearing on the screen. Images on the left of the screen
are viewed through left lens of the 3D glasses and those
on the right are viewed through right lens. With this
feature, you can monitor multiple screens at one time.
Comfortable fitting lightweight 3D glasses
The provided 3D glasses are a lightweight and
comfortable design for reduced fatigue after extended
periods of use. Used with the LMD-3251MT, the glasses
provide precise image quality and accurate color
reproduction.
BKM-30G (glasses-type) has a "frame center support"
system that fits any face shape. The temple frames are
made of flexible material and the lenses are encased in
the frame bridge. This avoids distorting images through
the lenses, even when adjusting the temples.
Additionally, the nose pad and temple tips hold the
glasses firmly under sweaty conditions, or in a physical
working environment. The BKM-31G (clip-on-type)
attaches to regular eye glasses, and features flip-up
lenses and a lightweight design. For additional viewers,
BKM-30G and BKM-31G are available as optional
accessories.
Supporting various 3D input signal formats
With BKM-250TG (optional), various signals, such as
3G, dual-stream, side-by-side and line-by-line, are
supported. Install BKM-250TG with a serial number
7100001 or later to display HD-SDI signal in 3D. While
multi-signal formats, including 1080p, 1080i, 1080PsF
and 720p, are available, line-by-line typed DVI signals
are also supported.
Checkerboard
Left and right HD-SDI input signals are displayed in a
grid pattern. The two signals shown in a grid makes for
easy adjusting of the iris and color settings for the
camera. This function is only available in 2D display
mode.
L/R switch
Left and right dual-stream HD-SDI signals can be
swapped over without being visually disturbed by black
frames. This allows you to easily compare the color and
brightness between left and right signals. This function
is only available in 2D display mode.
Disparity simulation
The phase of either or both left and right signal for 3D
image can shift horizontally. The monitor simulates
parallax without the need for 3D rig adjustment. It saves
time and effort in setting and adjusting the 3D rig and
equipment.
Note
Simulated images cannot be output to any device.
Horopter check
Left/right signals for the 3D image are displayed in
selected single colors. This helps you define if the
subjects are in front of the determined screen position or
behind it. You can carefully adjust the depth of the 3D
effect using this feature. This function is only available
in 3D display mode.
Flip H
If a half mirror type rig is used, left or right signal will
be reversed. With the Flip H feature, signals that are shot
this way are horizontally reversed again for normal
viewing.
Note
A delay between left and right signals occurs as a result
of the signal processing. Because left and right signals
are internally synchronized to offset the delay, display
speed may decrease before the image reaches the screen.
Payload ID
Channel assign information of payload ID data
superimposed on input signals is displayed. You can
monitor which of two channels a left/right input signal
is assigned to.
11
Features