Download  Print this page

Sony LMD-3251MT Instructions For Use Manual Page 38

Hide thumbs

Advertisement

Submenu
Setting
3D SIGNAL
Selects input signal format for 3D
FORMAT
display.
• 3G-B: Displays 3G Level-B HD-SDI
• DUAL: Displays dual-stream HD-SDI
• SEQUENTIAL: Displays field
• SIDE BY SIDE: Displays side-by-
• LINE BY LINE: Displays line-by-
• AUTO1: 3D display mode is
• AUTO2: When 3G Level-B 3G-SDI
DISPARITY SIM.
Adjusts the phase of left/right input
signals. You can monitor the depth of 3D
images using simulated 3D effect.
• LR: Shifts the phase of left and right
• RIGHT: Shifts the phase of right
• LEFT: Shifts the phase of left
38
Adjustment Using the Menus
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24p, 25p,
30p or 720/50p, 60p signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24p, 25p,
30p or 720/50p, 60p signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
sequential HD-SDI signals for 3D
display mode.
side typed HD-SDI signals for 3D
display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24p, 25p,
30p or 720/50p, 60p signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
line typed HD-SDI signals for 3D
display mode.
automatically selected for 3G
Level-B HD-SDI signals. Other
formats are displayed in 2D
display mode.
signals are input, the channel
assign information enables 3D
display mode and 2D display
mode to be automatically
switched.
channels at the same time.
channel.
channel.
Submenu
Setting
HOROPTER
Select ON to switch the display settings
CHECK
for the left/right channel signals. Select
OFF when you do not wish to perform
switching. By changing the display
settings, the left/right signals become
easier to identify.
• NORMAL: Displays video signals.
• BLUE: Displays video signals as RGB
blue color component.
• RED: Displays video signals as RGB
red color component.
• MONO: Displays video signals as
grayscale image.
• BLACK: Displays black signals. (No
video signals)
FLIP H
Changes display patterns (normal/
horizontally reversed display) in
monitoring left/right input signals.
• OFF: Deactivates the reversing
function.
• LEFT: Horizontally reverses left
signal.
• RIGHT: Horizontally reverses right
signal.
PAYLOAD ID
Displays the channel assign information
of payload ID superimposed on input
signals from the IN (INPUT)-1 and IN
(INPUT)-2 connector on BKM-250TG.
Going out of the 3D SETTING menu
renews channel assign information.
• -: Payload ID is not superimposed on
signals.
• x: Channel assign information is
detected as Link-3 or Link-4.
• LEFT: Channel assign information is
detected as Link-1.
• RIGHT: Channel assign information
is detected as Link-2.
Payload ID is only available when
DUAL is selected in 3D SIGNAL
FORMAT.
2D/3D DISPLAY
Sets the on-screen indication of the
display mode currently viewed.
Selecting AUTO or ON displays "2D" or
"3D" at the top left of the screen,
according to the display mode selected.
• AUTO: "2D" or "3D" is displayed for
about five seconds after switching
between the 2D and 3D display
mode.
• ON: "2D" or "3D" is always
displayed.
• OFF: The display is hidden.

Advertisement

Table of Contents

   Related Manuals for Sony LMD-3251MT

Comments to this Manuals

Symbols: 0
Latest comments: