Multi Display Setting - Sony LMD-3251MT Instructions For Use Manual

Submenu Setting
BACKGROUND Sets the brightness of the black bars
appearing in the upper and lower
positions of the screen, or on the
sides of the screen.
• OFF: Displays a darker bar
• ON: Displays a brighter bar
SD PIXEL MAPPING Selects SD picture size (pixels)
according to input signal format.
• COMPOSITE&Y/C: Set to
• RGB/COMPONENT: Set to
When picture signals in the
When picture signals in the
SPLASH LOGO Sets the splash logo display time
when the monitor is turned on.
• OFF: The splash logo is not
• 1: The splash logo is displayed
• 2: The splash logo is displayed
(black).
(gray).
monitor the signal input
through the COMPOSITE
IN connector or Y/C IN
connector.
monitor the signal input
through the R/G/B IN
connector or Y/P /P IN
B R
connector.
size of 720 × 576 (50i)
(or 720 × 487 (60i)) are
input
Select 720 × 576 (or 720 ×
487). This is the default
setting.
When 702 × 576 (or 712 ×
483) is selected, all sides of
the input picture are cut off
by several pixels.
size of 702 × 576 (50i)
(or 712 × 483 (60i)) or
equivalent are input
Select 702 × 576 (or 712 ×
483).
When 720 × 576 (or 720 ×
487) is selected, a black
border (of several pixels
wide) appears around the
input picture.
displayed.
for about 5 seconds.
for about 10 seconds.

MULTI DISPLAY SETTING

USER CONFIG MULTI DISPLAY SETTING
M U LT I D I S P L AY E N A B L E :
D I S P L AY L AYO U T :
S U B I N P U T S E L E C T :
P O S I T I O N :
F R A M E :
S U B P I C T U R E S I Z E :
Submenu Setting
MULTI DISPLAY Selects ON to display the multi display
ENABLE and OFF not to display.
Notes
• When the frame frequency of the
main display is different from that of
the sub display, the picture may be
disturbed.
When no signal is input to the main
display, the picture may not be
displayed correctly.
• When you set SUB INPUT SELECT
to OFF, MULTI DISPLAY ENABLE
is set to OFF automatically.
• When MULTI DISPLAY ENABLE is
set to ON, APA (page 35) is not
available.
• When PIP multi display mode is
selected, 3D display is only available
in the main display. In other multi
display modes, images appear in the
2D display.
xxx
xxx
xxx
x
x
x
33
Adjustment Using the Menus