Table of Contents
Advertisement
Picture
Fully digital 10-bit signal processing circuit
As well as digital signals, all signals including analog
signals are converted into digital signals. All signals are
processed using a fully digital 10-bit processing circuit
so that an image is produced in smooth gradation
without any deterioration of quality.
Auto chroma/phase function
The chroma and phase of the decoder are automatically
adjusted.
High image-quality/high-resolution Full HD
LCD panel
A Full HD high-resolution (1,920 × 1,200 dots) panel
and high brightness/ultra-wide field of view technology
enable you to use the monitor under various lighting
conditions and in numerous ways (installing on wall,
using several monitors to view an image, and so on.).
Because a color filter with wide-color reproduction and
LCD materials with high response speed are used, the
motion picture of the video signal is displayed clearer.
This monitor also performs sampling of signals at high
frequencies and provides a high resolution of 700 TV
scanning lines or more during the RGB or component
signal (480/60i, 575/50i) input.
Input
Accepts analog RGB input signals
Adopting the scan converter allows this monitor to
detect VGA, SVGA, XGA and SXGA analog RGB
signals input to the HD15 input connector.
For more information, see "About the preset signal" on
page 45.
Accepts DVI-D (digital) input signals
Adopting the scan converter allows this monitor to
detect VGA, SVGA, XGA and SXGA digital computer
signals input to the DVI input connector.
The number of the DVI input connectors can be
increased by installing the optional input adaptor into
the optional input port.
To view more than SXGA signals when the DVI input is
selected, use the cable within 3 m (118
length.
For more information, see "About the preset signal" on
page 45.
Optional port
Two optional input adaptors can be installed. The
composite, Y/C, component, analog RGB, SDI or DVI-
D signal can be input depending on the input connectors
of the board to be used.
12
Features
Multi-format
The monitor supports the video, Y/C, RGB, component,
SDI (3G/HD/SD, when the optional input adaptor is
used) signals and NTSC/PAL color systems. SDI
supports not only HD-SDI and SD-SDI, but also 3G-
SDI, which transmits twice as much data as HD-SDI
with a Single-link. HD15 (analog) and DVI-D (digital)
connectors are equipped for the PC input.
For more information, see "Available signal formats"
on page 44.
External sync input
The unit can be operated on the sync signal supplied
from an external sync generator.
Functions
APA (Auto Pixel Alignment) function
You can display pictures from the HD15 input connector
in the appropriate picture by simply pressing the APA
key.
Automatic termination (connector with
mark only)
The input connector is terminated internally at 75 ohms
when nothing has been connected to the output
connector. If a cable is connected to the output
connector, the internal terminal is automatically
released and the signals input to the input connector are
output to the output connector (loop-through).
Select color temperature and gamma mode
You can select the color temperature from among three
settings (D93, D65, D56) and gamma mode from
between two settings (2.2, DICOM). You can also adjust
the color temperature to the appropriate setting in
"USER1," "USER2," "USER3," "USER4" or "USER5."
Two-display
Two kinds of input signals are put on the monitor.
For more information, see DISPLAY LAYOUT of
"MULTI DISPLAY SETTING" on page 33.
Color space feature
Either ITU-R BT.709 or OFF can be selected for the
color space settings.
1
inches) in
/8
Scan function
You can select the display from among "NORMAL,"
"OVER," "FULL" and "NATIVE."
*
For selectable modes, see "Input Signals and Adjustable/
Setting Items" on page 16.
Select language display
You can select your language for the display from seven
languages - English, Chinese, Japanese, Italian, Spanish,
German and French.
*
Advertisement
Table of Contents
