Edge-Core ecs4510-28f Installation Manual page 26

| Introduction
C 1
HAPTER
Description of Hardware
SFP T S
RANSCEIVER LOTS
The switch contains 24 Small Form Factor Pluggable (SFP) transceiver slots that
operate at 1000 Mbps full duplex. These slots support 1000 Mbps SFP Gigabit
Ethernet transceivers and 100 Mbps Fast Ethernet trasceivers..
For information on the recommended standards for fiber optic cabling, see
"1000 Mbps Gigabit Ethernet Collision Domain" on page 53 and "100 Mbps Fast
Ethernet Collision Domain" on page 54.
SFP+ T S
RANSCEIVER LOTS
The Small Form Factor Pluggable Plus (SFP+) transceiver slots are 10G capable
slots that support both SFP and SFP+ transceivers (purchased seperately).
C P
ONSOLE ORT
An RJ-45 serial console port is provided on the switch front panel for a
connection to a console device through an included console cable. The console
device can be a PC or workstation running a VT-100 terminal emulator, or a VT-
100 terminal.
– 26 –