| Installing the Switch
C
3
HAPTER
Mounting
Figure 11: Installing the Switch in a Rack
If installing a single switch only, turn to
3.
page
43.
If installing multiple switches, mount them in the rack, one below the other,
4.
in any order.
D
S
ESKTOP OR
The switch includes four pre-installed rubber feet for desktop or shelf mounting.
To mount devices on a horizontal surface, follow these steps:
Set the device on a flat surface near an AC power source, making sure there
1.
are at least two inches of space on all sides for proper air flow.
If installing a single switch only, go to
2.
page
43.
If installing multiple switches, place each device squarely on top of the one
3.
below, in any order.
M
HELF
OUNTING
"Connecting to a Power Source" on
"Connecting to a Power Source" on
– 40 –