W/B White Balance; Color Selection Of Day Or Night Mode - Monacor TVCCD-1622COL Instruction Manual

High-resolution colour camera
Table of Contents

Advertisement

Available languages

Available languages

white balance
W/B
GB
For a natural colour reproduction, the camera must be
matched to the colour temperature of the light source used
(e. g. incandescent lamps, fluorescent lamps, sunlight).
ATW
Automatic white balance: The camera will auto-
matically adapt to the colour temperature of the
ambient light. This setting is recommended for
varying light sources (e. g. sunlight during the
day, artificial light at night).
PUSH
Faster response of the automatic white balance
than in the setting ATW.
AWC
White balance with a reference white: Hold a
white sheet of paper in front of the camera and
press the button ENTER. Repeat the procedure
if the ambient light has changed.
3200K
The camera is set to artificial lighting with a
colour temperature of 3200 K.
5600K
The camera is set to daylight with a colour tem-
perature of 5600 K.
MANUAL Manual white balance: Call the following sub-
menu with the button ENTER:
24
B/W MANUAL ADJUST
| - ..... * .......... - |
RED
BLUE | - ... * ............ - |
Fig. 9 Submenu for the manual white balance
1) In the line RED, adjust the red contribution
with the buttons
2) Go to the line BLUE with the button
adjust the blue contribution with the buttons
and .
3) Return to the line RED with the button
peat the settings alternately until the colour
cast of the picture reproduction has disap-
peared.
4) Return to the first menu page with the button
ENTER.
Selection of day or night mode
COLOR
COLOR
Fixed setting of day mode (colour reproduc-
tion).
B/W
Fixed setting of night mode (black-and-white
reproduction).
and .
and
. Re-

Advertisement

Table of Contents
loading

Table of Contents