Hawking HOD45B User Manual page 81

Enable 802.1x
Authentication (9):
RADIUS Server
IP address (10):
RADIUS Server
Port (11):
RADIUS Server
Password (12):
TIPS: Examples of WEP key
ASCII (5 characters): pilot phone
ASCII (13 characters): digitalFAMILY 82Jh26xHy3m&n
Hex (10 characters): 287d2aa732
Hex (26 characters): 9284bcda8427c9e036f7abcd84
To improve security level, do not use words that can be found in a dictionary or are
easy to remember! Wireless clients will automatically remember the WEP key, so you
only have to input the WEP key on wireless client once, and it is suggested that to use a
complex WEP key to improve security level. Once you have chosen a password, write
it down and keep it in a secure place.
After you finish WEP setting, please click 'Apply' (13) button and the following message
'Hex' as key format, you can use characters 0-9, a-f, and A-F.
You must enter at least one encryption key here, and if you
entered multiple WEP keys, they should not be same with each
other.
IEEE 802.1x is an authentication protocol. Every
user must use a valid account to login to this wireless access
point before accessing the wireless LAN. The authentication is
processed by a RADIUS server. This mode only authenticates
user by IEEE 802.1x, but it does not encryption the data during
communication. If there is a RADIUS server in you environment,
please enable this function. Check this box and another
sub-menu will appear:
Please input the IP address of RADIUS server here.
Please input the port number of RADIUS server here.
Please input the password here.
80
23561 2Hyux #@xmL
1152dabc85