Table of Contents
Advertisement
Channel Number (3):
Mac Address (4):
different band setting, you'll be able to allow or deny the
wireless client of a certain band.
2.4GHz Band
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only
wireless clients using the wireless band you select (802.11b,
802.11 Draft-N, or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this access
point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N
clients to connect to this access point, select 2.4GHz (B+G+N).
5GHz Band
5GHz (A): this mode allows 802.11a wireless network client to
connect this router (maximum transfer rate 54Mbps for 802.11a
clients).
5GHz (N): this mode allows 802.11n wireless network client to
connect this router (maximum transfer rate 300Mbps for
802.11n clients).
5GHz (A+N): this mode allows 802.11a and 802.11n wireless
network client to connect this router (maximum transfer rate
54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n
clients).
Please select a channel number you wish to use. Please note
that this should be the same channel as the other bridge you
wish to connect to.
Please input the MAC addresses of the other bridges you wish to
make a connection with.
44
Hide quick links:
Advertisement
Table of Contents
