Table of Contents
Advertisement
3-4-1-3 AP Bridge-Point to Point
Similar to station-infrastructure, this requires two HOD45B's on each end. This will
create a wireless bridge between these two points. No WiFi signal will be broadcast and
it will only make a wireless connection between those two points.
NOTE: Two HOD45B's must use the same mode, band, channel
number, and security setting!
Band (2):
Channel Number (3):
MAC Address (4):
Security Settings (5):
2
3
4
5
Select the band you want to use, the two HOD45B's must use the
same setting. Refer to 3-4-1-1 for definitions.
Select the channel you want to use, the two wireless
HOD45Bs must use the same setting.
Input the MAC address of another HOD45B
Click to setting security for this connection
(Please go to section '3-4-3 Wireless Security'
for detailed instructions).
69
Hide quick links:
Advertisement
Table of Contents
