Hawking HOD45B User Manual page 72

3-4-1-5 AP Bridge-WDS
Wireless Distributing System. This allows you to create a wireless network using up to
four HOD45B's using the same SSID (wireless name). It will broadcast a WiFI signal.
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.
Band (2):
SSID (3):
Channel Number (4):
Associated Clients (5): Click 'Show Active Clients' button, then an "Active Wireless
4
7
Select the band you want to use, all the HOD45B's must use the
same setting. Refer to 3-4-1-1 for definitions.
Input the SSID of your HOD45B's, the setting should be the
same with other HOD45B's for the convenience of roaming.
Select the channel you want to use, all the HOD45B's must use
the same setting.
Client Table" will pop up. You can see the status of all active
wireless stations that are connecting to the access point.
71
2
3
5
6