Hawking HOD45B User Manual page 67

ESSID (2):
Channel Number (3):
TIP: You can try to change channel number to another one if you think
the data transfer rate is too slow. There could be some other wireless
routers using the same channel, which will disturb the radio
communication between wireless client and the wireless router.
Associated Clients (4): Click 'Show Active Clients' button, then an "Active Wireless
After you finish these wireless settings, please click 'Apply' button, button, and the
following message will be displayed on your web browser:
This is the name of wireless access point. You can type any
alphanumerical characters here, maximum 32 characters.
ESSID is used to identify your own wireless access point from
others when there are other wireless access points in the same
area.
Default SSID
2.4GHz: Hawking_HOD45B_2.4GHz
5GHz: Hawking_HOD45B_5GHz
It's recommended to change default ESSID value to the one
which is meaningful to you, such as, 'myhome', 'office_room1',
etc.
Please select a channel from the dropdown list of 'Channel
Number', You can choose any channel number you want to use,
and almost all wireless clients can locate the channel you're
using automatically without any problem. However, it's still
useful to remember the channel number you use, as some
wireless clients support manual channel number selecting, and
this would help in certain scenarios when there are radio
communication conflicts.
Client Table" will pop up. You can see the status of all active
wireless stations that are connecting to the access point.
66