Table of Contents
Advertisement
3-4-1-6 Universal Repeater
In this mode, the HOD45B will act as a wireless repeater; it can be a wireless bridge and
access point at the same time. It can use bridge mode to connect to a Root access point
and use the access point function to service all wireless stations within its coverage. In
this mode, the HOD45B will repeat the wireless signal of any existing wireless
router/access point. It will act as a wireless relay and create a larger and seamless
network for your wireless devices to connect to
NOTE: For Repeater Mode, this router will demodulate the received
signal, checking if this signal is noise for the operating network then
have the signal modulated and amplified again. The output power of
this mode is the same as that of WDS and normal AP mode.
Band (2):
SSID (3):
2
4
5
7
Select the band you want to use, all the HOD45B's must use the
same setting. Refer to 3-4-1-1 for definitions.
This is the name of wireless router. You can type any
alphanumerical characters here, maximum 32 characters. SSID
is used to identify your own wireless router from others when
there are other wireless routers in the same area. Default SSID
is 'default', it's recommended to change default ESSID value to
73
3
6
Hide quick links:
Advertisement
Table of Contents
