Table of Contents
Advertisement
Channel Number (3):
Mac Address (4):
Set Security (5):
Adv. IP Address (6)
802.11 Draft-N, or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this access
point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N
clients to connect to this access point, select 2.4GHz (B+G+N).
5GHz Band
5GHz (A): this mode allows 802.11a wireless network client to
connect this router (maximum transfer rate 54Mbps for 802.11a
clients).
5GHz (N): this mode allows 802.11n wireless network client to
connect this router (maximum transfer rate 300Mbps for
802.11n clients).
5GHz (A+N): this mode allows 802.11a and 802.11n wireless
network client to connect this router (maximum transfer rate
54Mbps for 802.11a clients, and maximum 300Mbps for 802.11n
clients).
Please select a channel number you wish to use. Please note
that this should be the same channel as the other bridge you
wish to connect to.
Please input the MAC address of the other bridge you wish to
make a connection with
Click this button to select an encryption mode for this wireless
link, a new popup window will appear. Note: the security must
be the same on the other bridge.
This section allows you to set an IP Address and subnet mask to
41
Hide quick links:
Advertisement
Table of Contents
