Advertisement
1. Add fresh fuel into fuel tank.
2. Add one tablespoon of SAE 10W30 or 20W40 motor oil in the spark plug hole and
reinstall the spark plug. Ground the spark plug wire and run the engine over several
times too coat the cylinder body with oil.
3. Lubricate all control cables.
4. Elevate the engine body to raise all wheels off the ground.
5. Seal the exhaust pipe outlet with plastic bag to prevent water in.
6. If store ATV in a humid or salt-air atmosphere, cover all exposed metal surfaces
with a light plastic film of oil. Do not apply oil to any plastic parts or the cushion.
7. Take out the battery and store if in a dry place. The battery should be stored in the
place where the ambient temperature should be 30 temperature maximum and 0
temperature minimum.
Advertisement
