Advertisement
necessary to tighten nuts and bolts.
Note:
If you do not have a required torque wrench during maintenance, take your machine to a
dealer to check the torque settings and adjust them as necessary.
Engine oil
1. Engine oil level measurement
a. place the machine on a flat surface Warm up the engine for several minutes and
turn off it. Wait more than 10 minutes for the oil to drain back into the crankcase
before checking the oil level.
b. Wipe the dipstick off with a clean rag. Insert the dipstick in the filler hole.
c. Remove the dipstick and inspect the oil level.
d. The oil level should be between maximum and minimum marks. if level is low,
add oil to raise it to proper level.
2. Engine oil replacement and oil filter element cleaning.
a. place the machine on a flat surface. Warm up the engine for several minutes and
Advertisement
