Advertisement
Lubrication oil replacement of front drive gear case
a. Place the ATV on a flat surface
b. Place a container under the front drive gear case.
c. Remove the oil filter bolt and the drain plug to rain the oil.
d. Install the drain plug and tighten the torque 23Nm(2.3m.kg)
e. Fill the front drive gear case.
Spark plug inspection
You should periodically remove and check the spark plug because heat and deposits will
cause slow damage oaderosion of the spark plug. If electrode erosion is excessive, you
should replace the spark plug with one of the proper type D8REA.
Before installing the new spark plug, measure the electrode gap with a feeler gauge and
adjust to specification.
Spark plug gap: 0.6-0.8mm
When installing the spark plug, generally clean the gasket surface and use a new gasket.
Clean off and grime from the threads and tighten to specification.
Advertisement
