Advertisement
Don't try to ride over big obstacles such as rock and tree on the road. Follow the
proceduces in operation manual when riding over obstacles.
Slipping
The ATV may lose control when driving on loose and slippery surface. Moving your
gravity center forward is helpful to control the slipping of front wheels. When the rear
wheel begin to slip, steer direction properly. Apply the brake only until you have stopped
the slipping.
Paractise safely control slipping at low speed. On very slippery surfaces, such as ice,
drive slowly to avoid loss of control.
The above introduction is only for reference. Read it carefully and act according to
circumstances.
Periodic maintenance and adjustment
Periodic inspection, adjustment, and lubrication will keep your machine in the safest and
most efficient condition. The points of machine inpeciton, adjustment, and lubrication are
detailed in following.
Note:
Turn off the engine when maintaining unless specified .Have a dealer perform sevice if
you are not familiar with maintenance.
Operation manual and tool kit
You are recommended to put this operation manual in the vinyl bag and lay it under the
seat as shown. Put the tool kit and low-pressure tire gauge in the storage case.
The maintaining information included in this manual is provided you with the necessary
information for completing preventive maintenance and minor repairs by your self. The
tools provided in the tool kit are sufficient for this purpose, except a torque wrench
Advertisement
