Advertisement
1. Before cleaning the ATV:
a. Plug up the exhaust pipe with plastic bag or strong rubber band to prevent water
in.
b. The spark plug and oil filler caps must be strictly installed.
2. If the engine case is excessively dirt, wash it with degreaser. Don't use degreaser for
wheel.
3. Rinse the dirt and remove oil dirt on soft hose.
Caution:
Excessive water pressure may cause water seepage and deterioration of wheel
bearings, brakes , transmission seals and electrical equipment.
4. When rinsing dirty material for may times, use warm water and mild detergent-type
soap. Use old tooth brush a bottle brush to wash hard-to-get-at-places.
5. After cleaning ATV with clean water, immediately dry the surface with a chamois,
clean towel or soft absorbent cloth.
6. Clean the seat with a vinylupholstery cleaner to keep the cover pliable and glossy.
7. Apply automotive type wax to all chrome plated surfaces. Avoid using combination
cleaner-waxes. After using abrasives to protect scratched surface, let the engine idle
for several minutes.
After washing the brakes, let engine brake several times at slow speed to dry the
linings.
B. Storage
Long term storage (60 days or more) of your ATV will require some protective
procedures to prevent ATV from damage. After thoroughly cleaning the ATV, adopt the
following protective measures:
Advertisement
