Advertisement
If the lever is in this position, fuel will not flow.
Always turn the lever to this position when the engine is not running.
ON:
If the lever is in this position, fuel flows to the carburetor. Normal riding is done with
the lever in this position.
Seat
To remove the seat, pull the seat lock lever upward and pull up the seat at the rear.
To install the seat, insert the lobes on the seat front into the receptacle on the frame
and push down the seat at the rear. You should pay attention to make sure that the seat is
securely fitted.
Front carrier
Maximum load limit:40kg.
Rear carrier
Maximum load limit:80kg.
Front and rear brakes
Always check the brakes at the start of every side. Do not ride the ATV if you find any
problem with the brakes. If a problem cannot be corrected by the adjustment procedures.
Provided in this manual, have the ATV inspected by a dealer.
1. Brake levers and brake pedal
Check for correct free play in the brake levers and brake pedal, if the free play is
Advertisement
