Pk-1 - Nokia RM-632 Service Manual

Page 2 – 8

PK-1

PK-1 is a hardware protection key with a USB interface. It has the same
functionality as the PKD-1 series dongle.
PK-1 is meant for use with a PC that does not have a series interface.
To use this USB dongle for security service functions please register
the dongle in the same way as the PKD-1 series dongle.
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-230
RJ-230 is a soldering jig used for soldering and as a rework jig for the
engine module.
SB-6
The SB-6 test box is a generic service device used to perform Bluetooth
bit error rate (BER) testing, and establishing cordless FBUS connection
via Bluetooth. An ACP-8x charger is needed for BER testing and an
AXS-4 cable in case of cordless interface usage testing .
Sales package includes:
• SB-6 test box
• Installation and warranty information
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
Service Devices and Service Concepts
Software protection
key
SW security device
Soldering jig
Bluetooth test and
interface box (sales
package)
RM-632; RM-634; RM-699
Issue 3