Service Devices; Product Specific Devices; General Devices - Nokia RM-632 Service Manual

RM-632; RM-634; RM-699
Service Devices and Service Concepts

Service devices

Product specific devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-632; RM-634; RM-699. For the correct use of the service devices, and the best effort of
workbench setup, please refer to various concepts.

General devices

The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-632; RM-634; RM-699. For the correct use of the service devices, and the best effort of
workbench setup, please refer to various concepts.
Issue 3
FS-147
• FS-147 is equipped with a clip interlock system
• provides standardised interface towards Control Unit
• provides RF connection
• multiplexing between USB and FBUS media, controlled by VUSB
Note: Close lid of SD and SIM reader before attaching the flash
adapter.
MJ-266
MJ-266 is meant for component level troubleshooting.
The jig includes an RF interface for GSM and WCDMA. In addition, it has
the following features:
• Provides mechanical interface with the engine module
• Provides galvanic connection to all needed test pads in module
• Connector for control unit
• Access for USB connector
SS-88
The camera removal tool SS-88 is used to remove/attach the camera
module from/to the socket.
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
Flash adapter
Module jig
Camera removal tool
Page 2 – 5