RM-632; RM-634; RM-699
Service information differences between RM-632 and
RM-634
Transmitter troubleshooting
WCDMA transmitter troubleshooting
Steps
1. Set the phone to local mode.
2. In Phoenix, select Testing → WCDMA → Tx control . The Tx Control window opens.
3. Make settings for the band to be tested, according to the following table:
Band
WCDMA I
WCDMA II
WCDMA V
4. Make the following general settings (the same values for all bands). Note that Max power limit is not
checked by default.
Issue 3
Figure 46 Phoenix WCDMA Tx control window
9750
9400
4175
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
Channel
Page 6 – 11