Setting Up A System From The Ios Or Android App; New Wireless System Setup - Nuvo P3100 Product Manual

2. Setting Up a System from the iOS or Android App

Once you have connected the system to the local network you are ready to begin adding zone players in their desired locations, naming those locations for local control and
creating your multi-zone music system. The process is easily done from any iPod Touch, iPhone, iPad, or Android device using the NuVo Wireless Audio System app.

2.1 New Wireless System Setup

Download the app to your device from the iTunes App Store or the Google Play Marketplace. Make sure your device is connected to the same network as the NuVo Wireless
Audio System. Open the app and select "Setup a new system" from the initial screen, as shown in fig. 10. "Join my existing system" is used to connect a new iOS or Android
device to an existing system. Note that the iOS app will not run on older iOS devices that cannot support iOS5 or later versions.
Fig. 10
You should already have connected your Gateway to the home's network.
If not, make sure that connection is made, see section 1.2, Connecting
the Gateway to the Network. When the Gateway and home router
connection is made, simply touch "Next", as shown in fig. 11.
Fig. 12
Fig. 11
The app will indicate that the Gateway is connected to the network. Touch "Next" to
proceed to the individual zone player setup, as shown in fig. 12.
9