Gateways; Controller - Nuvo P3100 Product Manual

4.2 Gateways

The Gateway selection allows you to view and change important settings to the Gateway(s) operation. When "Gateways" is selected, as shown in fig. 49, the app will show
the Gateways present in the system, as shown in fig. 50. The Gateway page will show "Name", "Serial Number", and "Wireless", as shown in fig. 51.
Fig. 49 Fig. 50 Fig. 51
When "Name" is selected, a screen with a keyboard will allow the name of the chosen Gateway to be edited, as shown in fig. 52. This is useful if you are using more than one
Gateway in a system. "Wireless" shows the current channel selection for 2.4 and 5 GHz broadcast, as shown in fig. 53. The default is "Autoselect" but when that feature is
turned off and "Channel" is selected, a manual channel select choice will appear, as shown in fig. 54.
Fig. 52 Fig. 53 Fig. 54

4.3 Controller

When "Controller" is selected, as shown in fig. 55, a page will appear with the current software version number, as shown in fig. 56. It also has a "Reset" button which will
disassociate the app from the system. The screen will display its original preconfigured state, as shown in fig, 57.
Fig. 55 Fig. 56 Fig. 57
18