Adding Additional Gateways To An Existing System - Nuvo P3100 Product Manual

2.3 Adding Additional Gateways to an Existing System

Up to two additional Gateways can be added to a system when additional Wi-Fi range is needed. Additional Gateways must be hardwired to the network along with the origi-
nal Gateway. This can be done by plugging the new Gateway(s) into the first Gateway, into the installation's router, or a switch from the router. When a new Gateway is added
to the system, go to the Settings menu and select "Add a NuVo Component", as shown in fig. 21. The Controller will recognize that a new Gateway has been added and the
next step is to touch "Add Gateway(s)", as shown in fig. 22.
Fig. 21
The next step will join the new Gateway to the system, as shown in fig. 23. When the process is complete, the app will indicate that the Gateway has been successfully added,
as shown in fig. 24.
Fig. 23
The zones in the system will connect to the best Gateway signal at startup, depending on their location.
Fig. 22
Fig. 24
13