Bluetooth® Playback; Line In - Nuvo P3100 Product Manual

3.3 Bluetooth® Playback
An important feature of the P200 zone player is the ability to stream music content from any Bluetooth enabled device.
To take advantage of Bluetooth streaming, make sure that your device's Bluetooth is turned on. This is done within the device's settings. When in range of a P200, that zone
will appear in the device's Bluetooth menu. Choose the zone to "pair" your device, as shown in fig 30.
Fig. 30
A paired device will remain paired and available when it is within range of the paired zone. To connect a device and initiate playback, select Bluetooth as an audio source, as
shown in fig. 31. Then select the desired device, as shown in fig. 32. The app will show the selected device as "Connected", as shown in fig. 33, and the zone player will switch
to the Bluetooth stream. Music content control is made from the connected device.
Fig. 31 Fig. 32
Fig. 33

3.4 Line In

Each player has a 3.5 inch stereo audio line in on its back panel. This input allows any local zone analog music source to be plugged in and added to the system as an additional
source input. This is done by connecting a 3.5 mm stereo audio cable from the audio output on the playback device and into the input on the zone player, as shown in fig. 34.
Fig. 34
15