Setting Up A System From The Ios Or Android App; New Wireless System Setup - Using A Wifi Network - Nuvo NV-P200 Series Product Manual

NUVO

2.0 Setting Up a System from the iOS or Android App

Once you have connected the system to the local network you are ready to begin adding components in their desired loca-
tions, naming those locations for local control, and creating your multi-zone music system. The process is easily done
from any iPod Touch, iPhone, iPad, or Android device using the Nuvo Player app.

2.1 New Wireless System Setup - Using a WiFi Network

Download the app to your device from the iTunes App Store or the Google Play Marketplace. Make sure your device is con-
nected to the same network as the Nuvo Player Port folio System. Open the app and select "Set up my new system" from
the initial screen, as shown in Fig. 10. "Control my system" is used to connect a new iOS or An droid device to an existing
system. NOTE: The Nuvo Player system is multi-lingual. Upon setting up a new system the app will automatically use
the default language of your device (controller). Once the system is setup up, if another language is desired, go to SET-
TINGS/INTERNATIONAL/LANGUAGE and selecting another language. See Fig 10a
IMPORTANT Wireless configuration setup considerations:
NOTE: Not all wireless networks and devices are supported. The Nuvo Player Portfolio wireless capable devices are Wi-Fi
Alliance Certified. Wi-Fi Alliance Certified wireless access points and routers should be used. There may be cases where
non-Wi-Fi Alliance Certified devices work.
Supported network modes and encryption methods:
It is recommended that 802.11n, WPA2 be used.
802.11ac is not supported, wireless access points must be in 802.11n or 802.11n/ac mixed mode.
WEP is only supported by selecting "other" located at the bottom of the "Wireless Setup" page.
WPA2 is only supported using AES.
Unsupported network modes and encryption methods will be grayed out. The following network encryption types are not
supported:
WPA1
WPA2 Enterprise
Guest networks
Fig. 10
®
Fig. 10a
Connect player to Ethernet and turn on.
Open Nuvo Player app on a tablet or smart phone connected
to the same network and select "Set up my new system" Fig
10
Once a system is setup, changing the language is accom-
plished by going to Settings/International/Language and
selecting the desired language. Fig. 10a
15